Horizontal And Vertical Precision Rotary Indexing Table

Short Description:

The horizontal and vertical rotary tables are for indexing, circular cutting, angle setting, boring, spot facing operations and similar work in conjunction with a milling machine. This type rotary table is so designed as to permit machining operations at a higher dimension than that of TS type mtary table.

The base can be used in a vertical position to enable to carry out center work with the help of tailstock.

A flange for connecting scroll chuck is special supplied, and be packed independent. For special order, the dividing plates accessory allows the operator to accurately divide the 360 ° rotation of the clamping surface into divisions of 2 through 66, and all divisible of 2,3 and 5 from 67-132.

Send email to us

Product Detail

Product Tags

Spec.& Order No	HV-4”	HV-6”	HV-8”	HV-10”	HV-12”	HV-16”
Diameter of table (mm)	φ100	φ160	φ200	φ250	φ320	φ400
Morse Taper of center hole	#2		#3		#4
Diameter of center hole (mm)	φ20*8	φ25*6	φ30*6		φ40*10
Height of center for Vet. Mount (mm)	70	125	150	170	210	260
Width of the T-slot (mm)	6	10	12		14
Adjacent angle of table T-slot	90°			60°
Width of locating key (mm)	10	12	14		18
Module of thw worm gear	1	1.5	1.75	2	2.5	3.5
Transmission ratio of the worm gear	1:72	1:90
Graduation of the table	360°
Readout of the handwheel	2”	1”
Minimum reading of the vernier	10”
Indexing accuracy	120 〃	80〃	60 〃
Max.bearing(with table Hor.) kg	20	100	150	200	250	300
Max.bearing(with table Vert.) kg	10	50	75	100	125	150
Net weight Kg	7	23	31.5	46	77	150
Gross weight Kg	8	30	42	57	92	175